References
Listed below is all the known content in the system that links to this item.
Display & Error Codes
The CEMOTO D-series instrument panel reports faults as decimal error codes. This page is the full...
Resetting the CEMOTO Controller to Factory Settings
The FarDriver dongle procedure — and the cases where a reset is the wrong answer. Applies to: D-s...
Changing the Lock Set on a D02
Ignition lock replacement, the wiring checks to do while you are in there, and the 0-gear confusi...
Throttle Error E08 — Check the Throttle Before Replacing Parts
A twist grip that does not return is far more common than a failed throttle unit. Applies to: D-s...
Controller Error E09 — Check These Before Replacing the Controller
Heat, voltage sag and a shorted phase all present as E09. The controller is the last suspect, not...
Front Light Error E13 — Don’t Swap the Headlight Yet
Connectors and water ingress cause E13 far more often than a failed headlight. Applies to: D-seri...
Horn Not Working — Check These Before Replacing Parts
A silent horn is usually the button or a loose connector, not the horn itself. Applies to: D-seri...
CEMOTO Won’t Turn On — What to Check First
Start with the 0-gear sequence. It is not a fault, and it catches out new owners constantly. Appl...
Technical Guides — Video Library
CEMOTO publishes step-by-step assembly and troubleshooting videos. This page is the catalog; each...
Video Tutorials
Step-by-step video guides from the CEMOTO technical support library. Every video is embedded and ...