Changing the Speed Unit from KM/H to MPH
One parameter — P02 — and the two settings people change by mistake instead.
Applies to: D-series
Change Speed Unit from KM/H to MPH — if the player does not load, open the video on YouTube.
The setting
P02 controls the speed unit:
| Value | Unit |
|---|---|
0 |
KM/H |
1 |
MPH |
Steps
- Power on the bike and open the parameter menu (the display's settings entry).
- Navigate to P02.
- Change the value —
0for KM/H,1for MPH. - Save and exit the menu properly.
- Power cycle — off, then on.
- Confirm the speedo now reads in the unit you chose.
Watch out for
The two adjacent settings are not the speed unit, and changing them causes real problems:
- P06 (wheel diameter) — changes speedo accuracy. Set it wrong and the displayed speed is wrong in either unit.
- P07 (speed signal magnets) — changes the speedo calibration. Wrong value = wrong speed reading.
If your speedo is reading a plausible but incorrect number, the unit is probably fine and P06/P07 is the real problem. See the P-Setting Guide.